Anhui Tanjie International Trade Co., Ltd.
Why does the floor washing machine you buy always not work well? The answer is often hidden outside the purchase list.
Not every machine is called "commercial".
Not every cleaning equates to "efficient".
When your company, like Anhui Tanjie International Trade Co., Ltd., is committed to promoting the industrial cleaning equipment of Anhui Tanjie Environmental Protection Technology Co., Ltd. to the world, you will truly realize that a standard commercial floor washing machine is not randomly selected from the shelf. It's a precise calculation around time, cost and ground life. It is a precise calculation of time, cost and ground life.
01.Brush plate pressure determines "washing" or "wiping"
Imagine this scenario: You use a rag to wipe the table, and you use a steel wool ball to scrub the bottom of the pot. The results are completely different, isn't it like this?
The core secret inside a commercial floor scrubber is hidden in the pressure exerted by the brush disc on the ground. Among the machines currently on the market, the pressure ranges from 30 kg to 150 kg. When the pressure is not enough, oil stains and stubborn stains are only "smeared evenly" by the water, not "scraped off".
During the manufacturing process, Anhui Tanjie Environmental Protection Technology Co., Ltd. directly related the brush plate pressure and motor power. For a machine with a 500W motor, if the nominal pressure is only 40kg, it is more suitable for daily maintenance rather than deep cleaning. On the contrary, if the brush disc pressure of a machine exceeds 100 kilograms, then it has the ability to handle heavily polluted floors such as parking lots and workshops.
So, your first question should be: How dirty is your floor?
Lightly soiled (office, supermarket): pressure 40-60 kg.
Moderately dirty (warehouse, logistics center): pressure 60-90 kg.
Severe dirt (factory workshop, maintenance shop): pressure above 90 kg.
02.Water-absorbing motor, absorbing the last mile of "moisture"
After completing the cleaning operation, the water must be completely absorbed. Otherwise, the remaining water stains on the ground will become a safety hazard, and slip and fall accidents often occur during this "slippery" state for just a few seconds.
The component that makes the "buzzing" sound is the water suction motor. Its wind pressure and air volume determine whether the squeegee can "tear" the sewage to a clean state. Many low-price machines use low-power water-absorbing motors to control costs. The end result is that the cleaned area looks dry, but feels sticky to the touch.
Among the export models involved in Anhui Tanjie International Trade Co., Ltd., it always adheres to the practice of using high-power water-absorbing motors and matching them with curved water-absorbing rubber strips. This is not a deliberate display of technology at all, but a commercial logic: the less moisture remaining, the faster the ground will dry, the safer your employees and customers will be, and the longer the service life of the ground will be.
Please note that you should check whether the absorbent strip is oil-resistant and corrosion-resistant. If a low-quality rubber strip is used to clean a workshop with oil stains, it will deform in just one week, causing the water absorption function to completely fail.
03.Battery and battery life, the invisible ceiling that determines “efficiency”
If a floor washing machine operates for two hours, it needs to be charged for eight hours. Can it really be considered "commercial"?
No, it just slows down your pace in another way.
The time cost involved in commercial floor scrubbers is invisible, but it is the most deadly. There are two types of batteries: lead-acid and lithium batteries. Batteries have the attribute of capacity, which is measured in Ah, and the time it takes to charge. These three factors together form an efficiency triangle.
Lead-acid batteries have the characteristics of low cost, but the charging speed is relatively slow, usually taking eight to ten hours, and must be regularly refilled and maintained. It is suitable for the standard shift that is charged at night and used during the day.
Lithium batteries suitable for companies operating in three or multiple shifts are expensive, but they charge quickly and can be fully charged in one to two hours. There is no memory effect and they can be charged and used at any time.
When selecting equipment, Anhui Tanjie Environmental Protection Technology tends to recommend to customers to calculate battery life based on actual workload, that is, calculate your cleaning area, divide it by the working width of the machine, and then multiply by 0.6 (this is the efficiency coefficient) to get the actual battery life you need. Assume that the actual demand is for 3 hours of battery life, but you purchase a machine with only 2 hours of battery life, then the cost of the extra hour will reappear during each charging process.
04.Structural design and materials, invisible “anti-manufacturing” strength
Floor scrubbers are the kind of "coolies" that have to bravely move forward in a wet, dusty and oily environment every day. Its structure plays a decisive role in how long it can survive in such a harsh environment.
Is the fuselage chassis made of aluminum alloy or high-strength plastic? The aluminum alloy chassis is resistant to corrosion and deformation. If the plastic chassis is aged or subjected to impact, it is prone to cracking.
As for the sewage tank and clean water tank, do they use the rotational molding process? There is such a situation. There are no seams in the one-piece rotomolded water tank, and there will be no leakage or water seepage. However, those water tanks formed by splicing will have aging phenomena in less than half a year of use, and the sewage will seep into the motor compartment, which will directly cause the circuit to be burned.
Regarding wheels and steering: Should I choose solid wheels or pneumatic wheels? Solid wheels require no maintenance and are suitable for flat floors indoors. Pneumatic wheels perform well in shock absorption and are suitable for outdoor use or uneven ground.
A good commercial floor washing machine is not created by "design", but by "wear and tear". Every part of its body exists in the direction of "resisting wear and tear".
So when you look at a machine, lean down and look at its chassis, water tank seams and wheel material. These details are the real answer to whether it can accompany you for three or five years.
05.After-sales service: the last link but also the first link
There will always be problems with machines. Either today or tomorrow.
Which one can respond quickly when a machine breaks down? Which one's parts library covers the most common wearing parts, such as brush discs, rubber strips, suction motors and batteries?
When Anhui Tanjie International Trading Co., Ltd. conducts export business, after-sales service is a more critical bargaining chip than price. In the global market, if a machine is shut down for a week due to a loose screw, the loss will be much greater than the profit of the machine itself. Therefore, choosing a commercial floor scrubber is actually choosing a supplier's "spare parts response speed" and "technical guidance capabilities."
Back to the question at the beginning: Which machine do you need?
The answer does not exist in the parameter table, but in the places you face every day, in the corridors where your employees push it every time, and in the electricity and maintenance bills you pay at the end of the year.
There is a good floor washing machine for commercial use. It is silent, does not show off, and does not ask for credit. It just restores everything to its original state day after day before you arrive. And all you have to do is to think clearly before it comes to you: Is what you are looking for the speed of "wiping clean" or the durability of "wiping without damage"?
This choice of Commercial floor scrubber determines whether you will be more relaxed or more tired every day in the future.
